
Shrimp B · FPV RECEIVER
KP-R4861
Analog video receiver
- Frequency range
- 4867–6060 MHz
- Channel count
- 112 CH
Explore KP-R4861 from every angle.
Additional original product views require the media files from the live website. Files are linked to their original address until the included media sync is run.



Full technical specifications
Restored from the corresponding original model page.
| Model | KP-R4861 |
|---|---|
| Frequency range | 4867–6060 MHz |
| Channel count | 112 channels |
| Receiving sensitivity | −95 dBm |
| Dimensions (L × W × H) | 44 × 27 × 27 mm |
| Net weight | 14.2 g |
| RF connector | SMA female |
| RF input impedance | 50 Ω |
| Video output | 1 Vp-p / 75 Ω |
| Display | Dual 7-segment LED |
| Signal output | RSSI |
| Operating temperature | −10 to +65 °C |
112-channel frequency table
Values in MHz, taken from the original website. Check the exact frequency against your transmitter and applicable rules.
| Band | CH1 | CH2 | CH3 | CH4 | CH5 | CH6 | CH7 | CH8 |
|---|---|---|---|---|---|---|---|---|
| A | 5474 | 5492 | 5510 | 5528 | 5546 | 5564 | 5582 | 5600 |
| b | 5362 | 5399 | 5436 | 5473 | 5510 | 5547 | 5584 | 5621 |
| E | 5325 | 5348 | 5366 | 5384 | 5402 | 5420 | 5438 | 5456 |
| F | 5129 | 5159 | 5189 | 5219 | 5249 | 5279 | 5309 | 5339 |
| r | 4990 | 5020 | 5050 | 5080 | 5110 | 5140 | 5170 | 5200 |
| P | 5333 | 5373 | 5413 | 5453 | 5493 | 5533 | 5573 | 5613 |
| L | 4900 | 4940 | 4921 | 4958 | 4995 | 5032 | 5069 | 5099 |
| U | 5960 | 5980 | 6000 | 6020 | 6030 | 6040 | 6050 | 6060 |
| O | 5865 | 5845 | 5825 | 5805 | 5785 | 5765 | 5745 | 5725 |
| H | 5733 | 5752 | 5771 | 5790 | 5809 | 5828 | 5847 | 5866 |
| t | 5705 | 5685 | 5665 | 5645 | 5885 | 5905 | 5925 | 5945 |
| n | 5740 | 5760 | 5780 | 5800 | 5820 | 5840 | 5860 | 5880 |
| d | 4867 | 4884 | 5653 | 5693 | 5733 | 5773 | 5813 | 5853 |
| J | 5658 | 5695 | 5732 | 5769 | 5806 | 5843 | 5880 | 5917 |
Controls, wiring & installation
The board includes a +5V marked pin. Verify the exact input connector voltage and polarity separately. The module features an SMA female connector, LED channel display, CVBS output and RSSI.
Confirm the matching operating frequency, antenna connection, supply voltage, polarity and mounting clearance before final integration. Photos are not a substitute for the manufacturer's electrical diagram.
Check the complete video link before ordering.
Compare the receiver's frequency and channel table with your transmitter, then confirm power supply, antenna connection and installation requirements. Share your technical brief with our team for model guidance.
Find the VRX for your next build.
Tell us your receiver model, quantity and setup requirements.
